Yueqing Janoel Electric Equipment Co., Ltd.
temperature and humdity controller for egg incubator
Intelligent Hatch Controller
I,Overview Intelligent hatch controller is a fully intelligent PC control system which is designed and developed for the hatch industry. It adopts the latest micro-electronic technology and new electric parts and high-performance temperature and humidity sensor, and effectively guarantees stability and reliability of the product performance.II,Main technical indexes 1. Temperature display range: 0~99°C2. Temperature measurement precision: ±0.1°C3. Humidity display range: 0—99%RH4. Humidity control precision: ±3%RH5. output channels: 9-channel (over temperature, temperature control, low temperature, turn eggs left, turn eggs right, humidity control, alarm, fan and light).6. output current: 10A for temperature control and low temperature and 1A for others7. Length of measurement line: About 2 meters8. Working voltage: AC 180V~240V, 50HZIII,Button and parameter setting
L1 High temperature L2 temperature control
L3 under temperature L4 turn left
L5 turn right L6 humidity control
L7alarm L8 fan
L9 light Button Description
l During normal operation, the instrument enters into the temperature and humidity parameter setting by pressing Set button (click). The instrument enters into the Egg turn and ventilation calibration parameter setup by pressing Set button (hold the button for more than 5 seconds).
Start the fan by pressing Fan button (click).Stop the fan by pressing Fan button.
Start the lighting lamp by pressing Light button (click). Close the lighting lamp by pressing Light button.
The instrument enters into the manual egg turn state by pressing (hold for over one second).
The instrument enters into the alarm silence state by pressing button (hold for more than one second)
l In parameter setup, save the current changed data and enter into the next parameter setup by pressing Ok button (click).
Add/delete data by pressing and quickly add/delete the data by holding for over two seconds.
Exit from the parameter setup state by Set button. Temperature and humidity parameter setup
In normal operation, enter into the parameter setup state by pressing Set button and releasing it.
egg incubator temperature and humdity controller Intelligent Hatch Controller